Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: power moduleDescription: 40W Up to 960W, single-phase/three-phase Silverline series, with power enhancement function, 3-phase devices SL10 and SL20 can provide overload response selection. In fuse mode, if overload occurs, the device will shut down. In continuous mode, the device can reduce output power while increasing current (up to 80% amplitude) as an integral input fuse; Electronic output protection can use jumper wires to select parallel working mode and output LED indicators with patented assembly method, which can be quickly and easily installed on DIN rails with power enhancement function. The device can provide high current in a short period of time without damaging the output voltage. When the load continues to exceed this period, the PULS overload design will take over the load, thereby reducing the permanent increase in voltage power by 25% @>45 ° C # # # Note *=automatic range. At temperatures above+60 to+70 ° C, the power begins to decrease. ###Recognized Canadian UL/UL Certification # # # Switch Mode PULS5028 -
![]()
Category: DC/DCconverterDescription: 24V，4A DeviceNet The power input is 115/230V AC, 210-375V DC output is 24V DC 4A 100VA. The power limiting power supply can be turned off without a switch when overloaded, suitable for harsh environments. Note that the power begins to decrease at+60 to+70 ° C. ###Switch mode PULS7480 -
![]()
Category: DC/DCconverterDescription: 240W Switch mode DIN rail and panel mounted power supply, 24 → 28V DC, 8.6 → 106111 -
![]()
Category: DC/DCconverterDescription: 240W Switch mode DIN rail and panel mounted power supply, 24 → 28V DC, 8.6 → 103484 -
![]()
Category: power moduleDescription: Q The PULS Q series DIN rail power supply, with its new design details and synchronous rectification, not only has a small size but also provides high efficiency. With its 150% short-term peak power and built-in large output capacitor, these features help start the motor, charge the capacitor, absorb reverse energy, and allow for lower power levels to be used. High resistance to transients, power surges, and low electromagnetic emissions make these PSUs suitable for almost all possible environments. The integrated output power manager, large input voltage range design, and almost no input starting current simplify installation and use. With its dry DC ok contacts - a pair of green DC ok LED and red overload LED - the Q series power supply diagnosis is very easy. The unique quick connect spring clip terminal block makes installation safer and faster, and the large internationally recognized packaging for various applications makes these PSUs almost suitable for every situation. Active power factor correction for single-phase or three-phase components ranging from 80W to 960W reduces the minimum inrush current by 50% power, and intelligent power management control only takes 4 seconds (typical value) to quickly connect the spring clip terminal DC ok LED and overload LED DC ok relay contacts 88V to 375V DC input. Suitable for active filtering of single-phase input transient phenomena. Short term operation with low to 60V AC and high to 300V AC parallel and serial use. # # Switching mode PULS4275 -
![]()
Category: power moduleDescription: Q The PULS Q series DIN rail power supply, with its new design details and synchronous rectification, not only has a small size but also provides high efficiency. With its 150% short-term peak power and built-in large output capacitor, these features help start the motor, charge the capacitor, absorb reverse energy, and allow for lower power levels to be used. High resistance to transients, power surges, and low electromagnetic emissions make these PSUs suitable for almost all possible environments. The integrated output power manager, large input voltage range design, and almost no input starting current simplify installation and use. With its dry DC ok contacts - a pair of green DC ok LED and red overload LED - the Q series power supply diagnosis is very easy. The unique quick connect spring clip terminal block makes installation safer and faster, and the large internationally recognized packaging for various applications makes these PSUs almost suitable for every situation. Active power factor correction for single-phase or three-phase components ranging from 80W to 960W reduces the minimum inrush current by 50% power, and intelligent power management control only takes 4 seconds (typical value) to quickly connect the spring clip terminal DC ok LED and overload LED DC ok relay contacts 88V to 375V DC input. Suitable for active filtering of single-phase input transient phenomena. Short term operation with low to 60V AC and high to 300V AC parallel and serial use. # # Switching mode PULS2540 -
![]()
Category: power moduleDescription: Q The PULS Q series DIN rail power supply, with its new design details and synchronous rectification, not only has a small size but also provides high efficiency. With its 150% short-term peak power and built-in large output capacitor, these features help start the motor, charge the capacitor, absorb reverse energy, and allow for lower power levels to be used. High resistance to transients, power surges, and low electromagnetic emissions make these PSUs suitable for almost all possible environments. The integrated output power manager, large input voltage range design, and almost no input starting current simplify installation and use. With its dry DC ok contacts - a pair of green DC ok LED and red overload LED - the Q series power supply diagnosis is very easy. The unique quick connect spring clip terminal block makes installation safer and faster, and the large internationally recognized packaging for various applications makes these PSUs almost suitable for every situation. Active power factor correction for single-phase or three-phase components ranging from 80W to 960W reduces the minimum inrush current by 50% power, and intelligent power management control only takes 4 seconds (typical value) to quickly connect the spring clip terminal DC ok LED and overload LED DC ok relay contacts 88V to 375V DC input. Suitable for active filtering of single-phase input transient phenomena. Short term operation with low to 60V AC and high to 300V AC parallel and serial use. # # Switching mode PULS2022 -
![]()
Category: power moduleDescription: 15W Up to 100W, switch mode, MiniLine series small size, lightweight, can be quickly and easily installed on 35mm Din rail spring clip connection terminals 72W and 100W comply with PFC standard EN61000-3-2 adjustable output voltage overload and short circuit protection LED output indicator suitable for harsh environments # # Note *=automatic range. **Use the pre installed jumper to preset the voltage. When the temperature is between+50 and+70 ° C, the power rating begins to decrease. ###Recognized Canadian UL/UL Certification # # # Standard EN60950, UL508, CSA22-2 No. 950-M90, EN50178 # # # Switching Mode PULS7907 -
![]()
Category: power moduleDescription: 50W MiniLine 系列，带螺钉接线端子 输入频率范围为 47-63Hz 完全调节输出 45° 时，功率永久性增加 25% 过载和短路保护 输出 LED 指示 并行性能 ### 注 在 +60 至 +70°C 时，功率开始下降。 ### 开关模式 PULS4859 -
![]()
Category: power moduleDescription: 15W 至 100W，开关模式，MiniLine 系列 微小尺寸，轻型 可快速、简便地安装到 35mm Din 导轨上 弹簧夹接线端子 72W 和 100W 符合 PFC 标准 EN61000-3-2 可调输出电压 过载和短路保护 LED 输出指示器 适用于恶劣环境 ### 注 * = 自动量程。 ** = 使用配装的跳线预置电压。 温度在 +50 至 +70°C 之间时，功率额定值开始下降。 ### 认可 加拿大 UL/UL 认证 ### 标准 EN60950, UL508, CSA22-2 No. 950-M90, EN50178 ### 开关模式 PULS7025
